Frontline Lights Halo 120W 7inch Universal IP67 Waterproof Auxiliary LED Driving Light 4WD 4x4 Offroad Car Bike

Upgrade your off-road experience with the E-Mark 120W 7" Halo Ring LED Driving Lights. Designed for rugged terrains and extreme weather, these powerful 7-inch LED work lights provide superior brightness with an integrated amber DRL (Daytime Running Light) halo ring. Whether you're driving a truck, Jeep, SUV, or ATV, these lights enhance visibility while adding a stylish touch to your vehicle.

🔦 Key Features:

✅ 120W High-Intensity LEDs – Delivers exceptional brightness for night driving & off-road conditions
✅ Amber Halo DRL – Enhances daytime visibility & adds a premium look to your vehicle
✅ IP67 Waterproof & Dustproof – Withstands heavy rain, mud, and extreme weather
✅ Durable Aluminum Housing – Heat-resistant and shockproof for long-lasting performance
✅ Universal Fit (12V/24V) – Compatible with a wide range of vehicles, including trucks, Jeeps, SUVs, UTVs, and ATVs
✅ Easy Installation – Comes with adjustable brackets for quick mounting

Perfect for: Off-roading, worksite lighting, camping, foggy conditions, and highway driving.

🛠️ Installation Instructions for 120W 7" Halo Ring LED Driving Lights

Installing these 7-inch LED driving lights is a simple process. Follow the steps below for a secure setup.

🔧 Tools & Materials Needed:

✔️ Socket wrench & screwdriver
✔️ Wiring harness with relay & switch (recommended)
✔️ Electrical tape & zip ties
✔️ Multimeter (for voltage testing)

⚡ Step-by-Step Installation Guide

1️⃣ Mounting the Lights

1. Choose the Mounting Location

   • Common spots: front bumper, grille, hood, or roof rack.
   • Ensure there is enough clearance for adjustment and wiring.

2. Attach the Mounting Brackets

   • Secure the brackets to the LED lights using the provided screws.
   • Loosely position them to allow adjustments before final tightening.

3. Secure the Lights to the Vehicle

   • If your vehicle has pre-drilled holes, align the brackets and tighten the bolts.
   • If drilling is required, mark the spots, drill holes, and secure the brackets.

🔄 Wiring the Lights (12V/24V Systems)

2️⃣ Main LED Light Wiring (White & Black Wires)

• Red Wire (+): Connect to the battery’s positive terminal or fuse box.
• Black Wire (-): Connect to a solid metal ground or the battery’s negative terminal.

3️⃣ Wiring the Amber DRL Halo Ring

• Yellow Wire (+): Connect to the ignition or DRL fuse for automatic activation.
• Black Wire (-): Connect to ground (same as the main light ground).
• If you want manual control, connect the yellow wire to a switch inside the vehicle.

🛠️ Testing & Adjustments

1. Turn on the lights to check for proper function.
2. Test the amber DRL ring to ensure it activates correctly.
3. Adjust the beam angle for optimal visibility.
4. Secure all wiring using zip ties & electrical tape.

📌 Safety Tips:

✔️ Disconnect the battery before installation.
✔️ Always use a fuse or relay for added protection.
✔️ Ensure all connections are watertight if used in wet conditions.

🚀 Your installation is now complete! Enjoy enhanced off-road visibility and stylish amber DRLs.