Frontline Lights Raven 7Inch and 9Inch Universal IP67 Waterproof Auxiliary LED Driving Light 4WD 4x4 Offroad Car BikeR

Upgrade your vehicle’s lighting with the 9-Inch E-Mark Approved LED Work Light. Designed for off-road adventures and heavy-duty applications, this 9-LED spotlight delivers intense illumination, ensuring visibility in the darkest conditions.

✅ Super Bright LED Output – Advanced 9-LED array provides powerful brightness with a focused spot beam for long-range visibility.
✅ E-Mark Certified for Safety – Meets international lighting standards for on-road and off-road use.
✅ Heavy-Duty & Weatherproof (IP67 Rated) – Built to withstand extreme conditions, including rain, mud, and dust.
✅ Wide Voltage Compatibility (9V-36V) – Works with 12V & 24V systems, making it suitable for trucks, Jeeps, SUVs, ATVs, UTVs, and more.
✅ Durable Aluminum Housing – Designed for superior heat dissipation and shock resistance.
✅ Universal Fitment – Easily mounts on bumpers, roll cages, roof racks, and more.

🔹 Perfect for Off-Roading, Work Vehicles, and Foggy Conditions!

🔧 Installation Instructions

🛠️ Tools Required:

✔️ Socket wrench & screwdriver
✔️ Drill (if mounting holes are needed)
✔️ Wiring harness (if not pre-installed)
✔️ Zip ties & electrical tape

🚗 Step-by-Step Installation Guide

1️⃣ Mounting the Light

1. Choose the Installation Location

   • Common mounting areas: front bumper, grille, A-pillars, or roof rack.
   • Ensure the position provides maximum visibility without obstruction.

2. Install the Mounting Bracket

   • Attach the adjustable bracket to the light housing using the provided bolts.
   • Adjust the angle before tightening the bolts completely.

3. Secure the Light to the Vehicle

   • If mounting on a pre-drilled surface, align the bracket holes and insert the bolts.
   • If drilling is needed, mark the holes, drill, and secure the brackets with the provided hardware.

⚡ Wiring the LED Light (For 9V-36V Systems)

2️⃣ Connecting to Power

1. Locate a Suitable Power Source

   • You can connect directly to the vehicle’s battery or an auxiliary switch panel.

2. Connect the Wires

   • Red Wire (+): Connect to the battery's positive terminal or a switch-controlled fuse box.
   • Black Wire (-): Connect to the vehicle’s chassis ground or negative terminal of the battery.

3. Using a Relay & Switch (Recommended for Safe Operation)

   • If using a relay wiring harness, connect:
     • Power wire (red) to the battery
     • Ground wire (black) to the chassis
     • Switch wire to the dashboard or a separate control switch

🔄 Final Checks & Adjustments

3️⃣ Test & Secure

✅ Turn on the lights to check for proper functionality and brightness.
✅ Adjust the beam angle for optimal illumination.
✅ Secure all wires with zip ties and insulate connections with electrical tape.

📌 Safety Tips

✔️ Disconnect the battery before installing to avoid electrical shocks.
✔️ Use a fuse or relay to protect the electrical system from overload.
✔️ Ensure all wiring is waterproof if using in off-road or harsh weather conditions.

🚀 Your installation is complete! Enjoy improved visibility for off-road adventures and tough work environments.