Frontline Lights Vulture 40W Universal IP67 Waterproof Auxiliary LED Driving Light 4WD 4x4 Offroad Car Bike

Upgrade your vehicle’s lighting with Frontline Lights 40W Bi-LED Spot Lights, designed for superior visibility in any condition. These durable, high-performance auxiliary pod lights offer a dual-color beam (white & amber), making them perfect for off-road adventures, foggy weather, and night-time driving.

🔦 Key Features:

✅ 40W High-Intensity LEDs – Delivers powerful illumination for enhanced visibility.
✅ Dual-Color Beam (White & Amber) – Switch between clear white light for general driving and amber for foggy or dusty conditions.
✅ IP67 Waterproof & Dustproof – Built to withstand rain, mud, and extreme weather.
✅ Durable Aluminum Housing – Shockproof and heat-resistant for long-lasting performance.
✅ Universal Fit (12V/24V) – Compatible with trucks, SUVs, ATVs, UTVs, motorcycles, and off-road vehicles.
✅ Easy Installation – Includes mounting brackets and wiring for a hassle-free setup.

🚙 Perfect for: Off-road driving, worksite lighting, foggy/rainy weather, and night-time trail rides.

Installation Instructions for Frontline Lights 40W LED Spot Lights

🛠️ Tools & Materials Needed:

✔️ Socket wrench & screwdrivers
✔️ Drill (if mounting holes are not pre-drilled)
✔️ Wiring harness (if not included)
✔️ Electrical tape & zip ties
✔️ Multimeter (for voltage testing)

🔧 Step-by-Step Installation Guide

1️⃣ Mounting the Spot Lights

1. Choose a Mounting Location

   • Common locations: front bumper, hood, roof rack, A-pillar, or grille.
   • Ensure the area is sturdy and provides the desired beam angle.

2. Attach the Mounting Brackets

   • Secure the brackets to the lights using the provided screws.
   • Adjust the brackets to set your preferred angle before tightening fully.

3. Secure the Spot Lights to the Vehicle

   • If pre-drilled holes are available, align the brackets and tighten the bolts.
   • If drilling is required, mark the holes, drill, and attach the brackets securely.

⚡ Wiring the Spot Lights (For 12V/24V Systems)

2️⃣ Connect to a Power Source

1. Locate the Power Source

   • You can connect the lights directly to the battery or fuse box.
   • For controlled switching, use a relay and a dedicated on/off switch.

2. Connect the Wires

   • Red Wire (+): Connect to the positive terminal of the battery or fuse box.
   • Black Wire (-): Connect to a solid metal ground or the negative terminal of the battery.
   • Switch Wire (if applicable): Connect to an in-cab switch for manual control of light modes.

🔄 Testing & Final Adjustments

3️⃣ Test the Spot Lights

1. Turn on the vehicle and switch on the lights.
2. Test both white (driving mode) and amber (fog mode) functions.
3. Adjust the angle of the lights for optimal beam coverage.
4. Secure all wiring with electrical tape & zip ties to prevent loose connections.

📌 Safety Tips

✔️ Disconnect the battery before installation.
✔️ Use a relay switch to protect your electrical system from overload.
✔️ Ensure all connections are waterproof if used in off-road or wet conditions.

🔥 Upgrade your off-road lighting with Frontline Lights 40W LED Spot Lights – Order Now!

Let me know if you need a wiring diagram or video guide for reference! 🚙💡