Enhance your nighttime driving and off-road adventures with the Frontline Lights 5-Inch 75W LED Spot Driving Lights. Designed for trucks, SUVs, ATVs, UTVs, and off-road vehicles, these high-performance LED work lights deliver super bright 6500K white light for maximum visibility.

🔦 Key Features:

✅ Super Bright 122W LED Power – Produces a powerful, focused spot beam to cut through darkness and fog.
✅ 6500K Daylight White – Mimics natural daylight for clearer visibility and reduced eye strain.
✅ Durable IP67 Waterproof Design – Fully sealed to withstand rain, dust, and rough off-road conditions.
✅ Heavy-Duty Aluminum Housing – Provides excellent heat dissipation and impact resistance.
✅ Universal 12V/24V Compatibility – Works with trucks, Jeeps, 4WDs, UTVs, ATVs, boats, and heavy-duty vehicles.
✅ Easy Installation with Wiring Harness Included – Plug-and-play design for hassle-free setup.

🛠️ Installation Instructions for Frontline Lights 5-Inch 122W LED Spot Lights

📦 What’s in the Box?

✔️ 2 x 5-Inch 75W LED Spot Lights
✔️ 1 x Wiring Harness with Relay & Switch
✔️ Mounting Brackets & Screws
✔️ User Manual

🔧 Step-by-Step Installation Guide

1️⃣ Mounting the Lights

1. Choose a Mounting Location

   • Common spots: front bumper, grille, A-pillar, or roof rack.
   • Ensure the location provides an unobstructed beam.

2. Attach the Mounting Brackets

   • Secure the brackets to the lights using the provided screws.
   • Adjust the light angle before fully tightening.

3. Secure the Lights to Your Vehicle

   • If your vehicle has pre-drilled holes, align and tighten the brackets.
   • If drilling is needed, mark the holes, drill, and mount the brackets securely.

⚡ Wiring Instructions (12V/24V System)

2️⃣ Connect the Wiring Harness

1. Locate Your Power Source

   • The best option is the vehicle’s battery or fuse box.

2. Connect the Wires

   • Red Wire (+): Connect to the positive battery terminal.
   • Black Wire (-): Connect to the chassis ground or negative battery terminal.

3. Connect the Relay & Switch

   • Relay: Enhances safety by controlling the power flow.
   • Switch: Install inside the vehicle for manual operation.

4. Secure All Wires

   • Use zip ties and electrical tape to keep wires neat and prevent tangling.

🔄 Final Testing & Adjustments

3️⃣ Test Your Lights

1. Turn on your vehicle and activate the switch.
2. Ensure the lights work properly and without flickering.
3. Adjust the angle for optimal beam focus.
4. Tighten all screws and secure wiring.

⚠️ Safety Tips:

✔️ Always disconnect the battery before wiring.
✔️ Do not connect directly to high-power circuits without a relay.
✔️ Ensure all electrical connections are waterproof for durability.

💡 Upgrade Your Visibility – Order Your Frontline Lights 5-Inch 122W Spot Lights Today!